Your benefits
high manufacturing depth
Components from a single source
high flatness
uniform surface
Grounded edges
exact dimensional accuracy
deburred edges
Components from a single source...
edge milling
Weld seam preparation even on large parts, in particular with milled and shear burrs on straight edges, milling for straight inner and outer edges, contours and holes. Applying welding chamfers at an angle of 15° - 80°.
Trowalize
Uniform trowalization, also known as edge rounding or edge breaking, is part of the deburring process. In this process, stainless steel parts are placed in a rotating drum together with abrasives to desharpen and round sharp edges and ensure safe handling. Optimal edge rounding improves the adhesion of a coating to the workpiece. In addition, rounded edges pose fewer risks of injury.
surface finish
Our EdgeBreaker® 6000 is designed for complete processing after cutting. In a single run, this deburring machine covers the following processes:
- Deburring of cut parts
- Rounding from edges
- surface finish with sanding belts
- grain sizes: K80, 120, 400
The rotor ensures uniform grinding, optimal edge rounding and a radius of up to 2.0 mm at the edge of the sheet. Thanks to the vacuum table, both large and small sheet metal parts can be processed.
roller straightening
Roller straightening: with FlatMaster® by Arku
Compared to other straightening methods, roller straightening is possible with FlatMaster® easy and quick. In a hydraulic machine, a sheet metal part undergoes a series of alternating bends. The material is formed and waterjet, laser or flame parts become flat and virtually stress-free.
Particularly economical: Subsequent processes such as welding, bending or bending can therefore be carried out more quickly and reliably.
MILLING with drum machines
Perfection from experience — with FlatMaster® by arku
Smooth and virtually tension-free within a very short time: with FlatMaster® for waterjet, laser and flame parts. From 0.5 mm to 60 mm thick. Even with high-strength parts and moldings with recesses.
Perfectly deburr
with the ARKU rotor roller
The EdgeBreaker® 6000 enables the processing of the widest possible range of parts. Whether it's a punched part with a surface finish or a plasma part with a 2.0 mm edge radius, a small part or a large-area laser part — the machine allows the entire spectrum of flexible sheet metal processing.
Unique edge rounding up to 2.0 mm
The most prominent unit in EdgeBreaker® 6000 is the rotor. Its rotating brushes create a unique rounding on the edge of the sheet. Since the brushes hit the sheet metal in different directions, you get a very uniform result on its inner and outer contours. If necessary, up to 2.0 mm radius.
Automatic wear measurement
Always knowing where you stand is essential for a consistent work result. The EdgeBreaker® measures the condition of the tools and automatically compensates for wear.
The rotor ensures very uniform edge rounding and a radius of up to 2.0 mm at the edge of the sheet. Thanks to the vacuum table, both large and small sheet metal parts can be processed. With sanding belt, rotor and finish roller, the EdgeBreaker is® 6000 also the EdgeBreaker's most universal deburring machine® family
contact
+49 41 08 - 43 01 0
+49 41 08 - 43 01 43
info@nironit.de
call-back service
FAQ
What are the current cutting times?
The delivery time depends heavily on the workload of the individual machines and may vary.
Should components be required at short notice, this can be discussed with our sales staff.
We usually produce fixed coil lengths in 8-10 AT.
You can find our current cutting and delivery times here.
I have questions about my bill, who can I contact?
If you have any questions about the invoice, you can contact the colleagues from the order processing department. The contact details can be found on the delivery note or the invoice.
Where can I find my factory reports/certificates?
Our warehouse material is exclusively managed with certificates/certificates. You will receive these in digital form shortly after delivery of your delivery. If you have not ordered a certificate, please feel free to contact us and we will make it available to you.
If certificates have been ordered, they are usually sent digitally with our delivery note, but at the latest with the invoice.
Who can I contact if I have an enquiry?
You can submit an enquiry directly from our homepage using the contact form. The contact details, such as telephone number and email address, of our sales representatives can be found under the “About Us” -> “Team” tab.
We look forward to hearing from you.
.png)
