WATERJET
CUT with Nironit
Waterjet cutting is a process in which a high-pressure water jet mixed with abrasive particles is used to cut stainless steel, for example. The precise control of the water jet enables the production of a wide variety of contours and cutouts with the tightest tolerances. waterjet cutting is a separation process without thermal influences, in which the material does not burn, does not get microcracks, harden or change its structure.
Our CNC-controlled waterjet systems with max. 4 cutting heads are equipped with energy-efficient pumps that generate a pressure of 3800 bar.
Your benefits
Precise cut edges
high surface quality of the cut edges
high cutting performance
no structural change
no burr formation
tightest tolerances
Workpieces can usually be used immediately without rework
materials
1.4000/AISI 410S
1.4003
1.4006/AISI 410
1.4162/US S32101
1.4301/1.4307/AISI 304/304L
1.4305/AISI 303
1.4306/AISI 304L
1.4313/US S41500
1.4362/US S32304
1.4404/AISI 316L
1.4410/US S32750
1.4435/AISI 316L
1.4462/US S31803
1.4501/US S32760
1.4529/US N08367
1.4539/AISI 904L
1.4541/AISI 321
1.4547/US S31254/254 SMO
1.4550/AISI 347/347H
1.4571/AISI 316Ti
1.4713
1.4828/AISI 309
1.4835/253 MA
1.4841/AISI 314
1.4845/AISI 310S
1.4878/AISI 321H
1.4903/ASTM A387 size 91
1.4948/AISI 304H
Cutting and delivery times
(Delivery times may vary depending on the order.)
General
tolerances
from 60 mm thickness by arrangement. Almost vertical cut with low inclination tolerances.
thickness
up to width/length 100
width/length
100 - 1000
width/length
1000 - 2000
width/length
2000 - 6000
Perndorfer WSS4030
Complete cutting area: 4000x3000 mm
Largest possible rectangle: 4000x3000 mm
Number of heads: 4 heads
All systems are equipped with the SERVO-JET4000 Pure pump with a pressure of 3800 bar. We also recycle the water using the modern water treatment plant HTPRS WASSERRECYCLING. A high level of energy efficiency and recycling are therefore the cornerstones of our production.
WaterJet 6080Q
Complete cutting area: 6000x8500 mm
Largest possible rectangle: 4920x8500 mm
Number of heads: 4 heads
All systems are equipped with the SERVO-JET4000 Pure pump with a pressure of 3800 bar. We also recycle the water using the modern water treatment plant HTPRS WASSERRECYCLING. A high level of energy efficiency and recycling are therefore the cornerstones of our production.
Microstep MSNC500
Complete cutting area: 3000x9200 mm
Largest possible rectangle: 2600x9200 mm
Number of heads: 2 heads
All systems are equipped with the SERVO-JET4000 Pure pump with a pressure of 3800 bar. We also recycle the water using the modern water treatment plant HTPRS WASSERRECYCLING. A high level of energy efficiency and recycling are therefore the cornerstones of our production.
The one from you is missing
required material?
Visit our online shop or
Take with us contact on:
FAQ
What are the current cutting times?
The delivery time depends heavily on the workload of the individual machines and may vary.
Should components be required at short notice, this can be discussed with our sales staff.
We usually produce fixed coil lengths in 8-10 AT.
You can find our current cutting and delivery times here.
I have questions about my bill, who can I contact?
If you have any questions about the invoice, you can contact the colleagues from the order processing department. The contact details can be found on the delivery note or the invoice.
Where can I find my factory reports/certificates?
Our warehouse material is exclusively managed with certificates/certificates. You will receive these in digital form shortly after delivery of your delivery. If you have not ordered a certificate, please feel free to contact us and we will make it available to you.
If certificates have been ordered, they are usually sent digitally with our delivery note, but at the latest with the invoice.
Who can I contact if I have an enquiry?
You can submit an enquiry directly from our homepage using the contact form. The contact details, such as telephone number and email address, of our sales representatives can be found under the “About Us” -> “Team” tab.
We look forward to hearing from you.
.png)
